SZNS SANS 10187-3: 2013 Load Securement of Vehicles Part 3: Metal Loads

Category:

Description

This part of SANS 10187 covers the safe securement and loading of metal loads on vehicles.

This part of SANS 10187 covers the following categories of metal load:

  1. a) metal plate;
  2. b) metal sheet in rolls or coils;
  3. c) metal bars or billets;
  4. d) long flexible sections;
  5. e) large castings and fabricated units;
  6. f) wire coils; and
  7. g) scrap metal.

Contents                                                                                                                             Page

1 Scope…………………………………………………………………………………………………………………………………………………1

2 Normative references……………………………………………………………………………………………………………………..1

3 Definitions…………………………………………………………………………………………………………………………………………1

4 General Requirements………………………………………………………………………………………………………………….3

4.1 Tyre size designation …………………………………………………………………………………………………………………..3

4.2 Nominal section ………………………………………………………………………………………………………………………….4

4.3 Nominal rim diameter ……………………………………………………………….….……….………………………….4

4.4 Nominal aspect ratio……………………..…….………………….……………….…………………………………………5

4.5 Speed rating symbol markings…… …………………………………………….……………………………………..5

4.6 Load index number…………………………………….………… …………………………….……………………………..5

4.7 Regrooving……………….……………………….………………………………..…………….…………………………………5

5 Inspection and Test  ……..……………………………………………………………………………………………………….6

5.1 Visual inspection …………………………………..……………………………………………………………………………8

5.2 Measuring the section width and overall diameter ………………………………………..………………..9